Home > Winding Wires Test Equipment >

IEC60851-3 Rectangular Wire Mandrel Winding Test Apparatus Bending arm length 300mm and 400mm

Product Categories

Electrical Safety Test Equipment [200]
Environment Test Equipment [65]
Impact Test Equipment [82]
EMC Test Equipment [36]
Lamp Cap Gauge [31]
Test Finger Probe [108]
Plug Socket Tester [85]
Appliance Couplers Testing Equipment [13]
Induction Cooker Vessels [25]
IP Testing Equipment [60]
Winding Wires Test Equipment [8]
Type C Goniophotometer [9]
Led Testing Equipment [33]
Integrating Sphere Spectrophotometer [8]
Transformer Testing Equipment [10]
Ac Dc Power Supply [15]
Cable Testing Equipment [12]

Pego Electronics (Yi Chun) Company Limited

Trust Seal

Verified Supplier

Credit Check

Supplier Assessment

Contact Now

IEC60851-3 Rectangular Wire Mandrel Winding Test Apparatus Bending arm length 300mm and 400mm

Name: IEC608513 Rectangular Wire Mandrel Winding Test Apparatus Bending arm length 300mm and 400mm
Brand: Pego
Price: 1 USD

Flange diameter : Ø180mm and Ø260mm

Model Number : PG-MWT

Standard : IEC60851-3

Brand Name : Pego

Power supply : 220V/50hz

MOQ : 1

Packaging Details : wooden case

Supply Ability : 100sets/month

Payment Terms : T/T

Bending arm length : 300mm and 400mm

Certification : Third-Lab Calibration Certificate

Bending arm rotation angle : >180°

Place of Origin : China

Delivery Time : 20 working days

Contact Now

Rectangular Wire Mandrel Winding Test Apparatus

1. Introduction

The rectangular wire mandrel winding test apparatus is designed according to IEC60851-3 clause 6.2.2 figure 4 and GB/T4074.3 clause 6.2.2 figure 4. It’s suitable for winding testing of various rectangular wires with a nominal conductor diameter of 1.60mm or less—including enameled rectangular wire, paper-insulated rectangular wire, glass-fiber-insulated rectangular wire, and film-wrapped wire—as well as corresponding copper and aluminum rectangular wires.

A straight piece of wire approximately 400mm in length shall be bent through 180° round a polished mandrel of the diameter given in the relevant standard in two directions to form an elongated S-shape. The straight part between the U-shape bends shall be at least 150mm. Care should be taken to ensure that the specimen does not buckle or depart from a uniform bend.

2. Specification

Winding Host	1^st host for flatwise winding (on the thickness)	2^nd host for edgewise winding (on the width)
Flange diameter	Ø180mm	Ø260mm
Bending arm length	300mm	400mm
Bending arm rotation angle	>180°
Test rod	Stepped rods: 3pcs (comprising 36 distinct circular diameters ringing from Ø4-Ø60mm, Mandrel (standard diameters): 62pcs, Ø4-Ø80mm

Product Tags:

IEC60851-3 Rectangular Wire Winding Apparatus

Rectangular Wire Mandrel Winding Test Apparatus

IEC60851-3 Rectangular Wire Mandrel Winding Test Apparatus Bending arm length 300mm and 400mm Images

Inquiry Cart 0

Send your message to this supplier


*From:	Your email address is incorrect!
*To:	Pego Electronics (Yi Chun) Company Limited
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!